35t & 50t | Swivel Ball Head
Get your gear OFF the ground with the WORLD’S LIGHTEST Jack Stands and accessories.
Our custom designed Swivel Ball Head attachment for G.E.T. change aligns with the Dozer blade push arm(s) angle. It sits atop our of our 35t | Type 2 & 3 and 50t | Type 1, 2 & 3 Jack Stands and is sold separately.
It is specifically intended for use in this application as the arms may not be parallel to the floor while working on them. The Swivel Ball Head offsets the requirement for lateral stability because the arms are attached to the Dozer.
This attachment shall only be used for this type of application when the item being supported is securely attached to a machine that is connected to the ground by other means i.e. tracks & tyres.
N.B. The Swivel Ball Head attachment DOES NOT fit in Height Adjusting Inserts. You may place either one or the other in the cap of the Jack Stand.
The Swivel Ball Head attachment is a stand alone component. It slips straight into the cap of the 35t & 50t Jack Stands. This is to support and align with the Dozer blade push arm(s) angle during G.E.T. change.
This addition to our Jack Stand makes a very versatile product. Especially when coupled with our custom built Placement Trolley that locks securely onto an Adapter Plate, they can also be manoeuvred safely and easily into position.
N.B. The Swivel Ball Head attachment DOES NOT fit in Height Adjusting Inserts. You may place either one or the other in the cap of the 35t & 50t Jack Stands.